Used Bermaq AMI-C 2100 edge polishing machine

Used inventory · Available · 2025

Bermaq AMI-C 2100

Used 2025 Bermaq AMI-C 2100 automatic CNC acrylic edge polisher with 12 pneumatic clamps installed. Processes straight 90° edges and beveled edges with automatic head tilt from −2° to +63° per CNL. Capacity depends on setup and tooling; sale inclusions are unconfirmed.

  • 10.4-in CNC touchscreen and electronic depth adjustment
  • Four-position polishing head
  • Machine-specific nameplate ratings listed below; confirm facility requirements with CNL

Technical specifications

Maximum working lengthApprox. 82.7 in (2,100 mm)
Minimum part length8 in (203 mm)
Installed clamps12 pneumatic clamps
Edge capability / automatic tiltStraight 90° edges; −2° to +63° automatic head tilt per CNL
Nominal model thickness — straight edges0.08–4.72 in (2–120 mm), depending on setup and tooling
Nominal model thickness — at 45°Up to 4.13 in (105 mm), depending on setup and tooling
CNC control10.4-in CNC touchscreen
Depth adjustmentElectronic
Polishing headFour-position
Spindle speed6,000–12,000 rpm
Feed speed3.94–393.7 in/min (0.1–10 m/min)
Air pressureApprox. 87 psi (6 bar)
Extraction diameterApprox. 3.15 in (80 mm)
Nameplate — electrical supply208 VAC three-phase + PE, 50/60 Hz
Nameplate — power6 kW
Nameplate — full-load current19 A
Nameplate — weightApprox. 4,300 lb (1,950 kg)

Photos

Machine videos

Polishing demonstration
Polished edge close-up

Used inventory inquiry

Ask about the Bermaq AMI-C 2100

Ask about this machine, cut samples, shipping and availability. Confirm sale inclusions and facility requirements with CNL.

Or call (562) 293-7208 — we answer from the shop floor.